BRAYER BR4914, Инструкция по эксплуатации

Страница: 6 / 36

6 EN
BEFORE THE FIRST USE
After the unit’s transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using it.
• Use the humidifier at the room temperature from
+10° С to +40°С and
• relative humidity less than 80%.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that the indicated specifications of the
power supply voltage of the unit correspond to the
specifications of your mains.
USING THE ULTRASONIC HUMIDIFIER
• Remove the nozzle (1), remove the water tank (2)
from the unit body (6) (pic. 1).
• Turn over the water tank (2), turn the lid (3)
counterclockwise and remove it (pic. 2).
• Fill the water tank (2) with the required amount of
water (pic. 3).
• Notes: — if the tap water used is hard, use water
cleaned with household filters or mix tap water with
distilled water in proportion 1:1.
• Install the lid (3) on the water inlet (5) and thread it
turning clockwise (pic. 4).
• Install the tank (2) filled with water on the unit body
(6) (pic. 5).
• Wait till the process chamber (5) is filled with water.
• If you want to use the aromatization function, remove
the container (8). Add some drops of water-soluble
aromatic oil and install the container (8) back to its
place (pic. 6).
• Notes:
- use water-soluble aromatic oils only
- if you are not going to use the aromatization
function, remove the container (8), wash it with
water, dry and install back to its place
• Insert the power plug into the mains socket, the
button (7) « » lighting will light up red.
• Switch the air humidifier on pressing the button
(7) « », the air humidifier will switch on and start
operating at maximal «mist» release intensity. The
button (7) « » lighting will light up blue.
• Set the «mist» release intensity level by pressing
repeatedly the button (7) « ». At medium «mist»
release intensity the button (7) « » lighting will glow
green, at minimal intensity — yellow.
• To switch the air humidifier off, press the button
(7) « » again, the air humidifier will go out and the
button (7) « » lighting will light up red.
• To switch the night operation mode, press and hold
the button (7) « » for 2 seconds.
• If the water tank (2) is empty, the button (7) « »
lighting will be flashing red.