BRAYER BR4267, Инструкция по эксплуатации

Страница: 7 / 52

7 EN
• Turn off the Vacuum Cleaner, using the Power button,
after use or before cleaning.
• For children safety reasons do not leave polyethylene
bags used as a packaging unattended.
• To avoid damage, transport the unit in the original
package.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
BEFORE THE FIRST USE
After the unit’s transportation or storage at negative
temperature, unpack it and wait for at least 3 hours
before using it.
• Unpack the vacuum cleaner, remove all packaging
and advertising materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages; if the unit is damaged,
do not switch it on.
• Make sure the indicated Power Adapter voltage
specifications correspond to the specifications of
your mains. No additional setup is required when
using the device with the mains operating on 60 Hz
frequency.
ASSEMBLING THE VACUUM CLEANER
• Install the rechargeable battery (12) to the installation
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger of
suffocation!
• The unit is not intended for usage by children.
• Do not leave children unattended to prevent using
the unit as a toy.
• Do not allow children to touch the power adapter
body during battery charging.
• Be especially careful if children or disabled persons
are near the operating unit.
• During the unit operation and breaks between
operation cycles, place the unit out of reach of
children.
• The unit is not intended for usage by physically or
mentally disabled persons (including children) or by
persons lacking experience or knowledge if they are
not under supervision of a person who is responsible
for their safety or if they are not instructed by this
person on the usage of the unit.
• Do not repair the unit by yourself. Do not
disassemble the unit by yourself; if any malfunction is
detected, and after the unit has been dropped, apply
to the service center.