BRAYER BR3402, Инструкция по эксплуатации

Страница: 10 / 48

10 EN
STEP 5
• In the final stage of hair styling remove the installed
attachment comb (10, 11, 12 or 13) from the clipper,
turn the blades of the clipper towards the hair and
trim hair on the temples and neck carefully. Before
creating the contour, comb the hair above ears.
Slightly bend back the person’s ear so it will not get
in the way of cutting hair. Do not press the clipper
strongly, there is danger of injuries or cuts when open
blades come in contact with skin.
• Notes: — without using the attachment combs (10,
11, 12 or 13), for a short haircut, you can change the
remaining hair length in the range from 0.8 mm to
2 mm, to change the remaining hair length turn the
lower part of the hair clipper body (4) (pic. 5).
• After you finish cutting hair, switch the hair clipper off
by moving the switch (5) to the position «0».
• Remove the installed attachment comb (pic. 4), clean
it from hair, remove the blade block (6) (pic. 6) and
clean it (pic. 7) with the brush (15). Clean the inner
cavity under the blade block (6) (pic. 8).
• Lubricate the blade block (6) (pic. 2).
• Install the blade block (6) back to the installation
place (pic. 9).
CLEANING AND CARE
• After you finish using the hair clipper, switch it off. If
the hair clipper is powered by the adapter (9), unplug
the power adapter (9) and disconnect the connecting
cord jack of the adapter from the hair clipper body
(pic. 1).
• Remove the installed attachment comb (10, 11, 12 or
13) (pic. 4) and clean it from hair with the brush (15).
• Remove the blade block (6) (pic. 6).
• Clean the blade block (6) (pic. 7) and the clipper
inner cavity under the blade block (6) with the brush
(15) (pic. 8). Do not wash the blade block (6) and the
inner cavity of the hair clipper body under a water jet.
• Clean the hair clipper body (7) with a soft, slightly
damp cloth, and then wipe it dry.
• Do not use abrasives or solvents to clean the hair
clipper body (7), the power adapter (9) and the
attachment combs (10, 11, 12, 13).
• Never immerse the hair clipper, the power adapter
(9) and the power adapter cord into water or other
liquids.
• Lubricate the blade block (6) after every use with the
lubricating oil (14).