background image

Questions or concerns? Call (800) 248-5327.

DO NOT RETURN TO STORE

QUESTIONS OR COMMENTS? CALL (800)-248-5327

AN IMPORTANT MESSAGE TO PARENTS:

This manual contains extremely important safety information. For your child’s 

safety, it is your responsibility to completely review this information with your child 

and make sure that your child understand all warnings, cautions, instructions and 

safety topics so that all riders are able to safely and responsibly use this scooter. 

It is recommended that you periodically review and reinforce all information in this 

manual with all riders, and that you inspect and maintain your scooter to insure their 

safety.

GENERAL WARNING:

Riding a scooter can be a dangerous activity. Certain conditions may cause 

components to fail without fault of the manufacturer. Scooter can and is intended to 

move and it is therefore possible to lose control, fall off and/or get into dangerous 

situations that no amount of care, instruction or expertise can eliminate. If such a 

thing does occur you can become seriously injured or die, even when using safety 

equipment and other safety precautions.

NOTE: Manual illustrations are for reference purposes only. Illustrations may not reflect 

the exact appearance of the actual product. Specifications are subject to change 

without notice.

ASSEMBLY

1.

 Align handlebar onto stem tube and install handlebar clamp and hardware. Tighten 

bolts evenly and securely with the supplied 5mm hex wrench and 10mm wrench. 

2.

 Slide stem tube onto fork steer tube. With the front wheel pointed straight forward, 

the handlebars should be square to the front wheel; tighten the collar clamp bolts 

evenly and securely with the supplied 5mm hex wrench and 10mm wrench.

TO UNFOLD

3.

 Slide fold button (A) forward towards the front wheel while pulling up on the 

handlebar assembly (B) away from the deck (C). Release fold button (A) and handlebar 

assembly will lock into place.

TO FOLD

4.

 Slide fold button (A) forward towards the front wheel while pulling handlebar 

assembly (B) down towards the deck (C). Release fold button (A) and handlebar 

assembly will lock into place.

BRAKING

5.

 Apply pressure onto the foot brake of the rear wheel to slow or to stop the scooter.

5

1

2

3

4

B

B

C

C

A

A

Отзывы: