Accessories for Food Processor with Blender
Model EP90XX
CAUTION: Make sure that the unit is
unplugged from the power source and
the operating button is “OFF” before
inserting or removing attachments and
before cleaning.
1.
Remove the processor bowl and lid.
2.
Remove the safety cover. This can
only be done once the processor lid
has been removed.
3.
Place the blender into its location on
the processor body with the handle to
the left. Turn counter clockwise until
the blender clicks into place and the
arrows are aligned.
Warning: Use extreme caution - blades
are sharp. Handle carefully.
4.
Place food in blender.
5.
Place the blender lid and the
measuring cap on the blender.
6.
Replace the processor bowl and
processor lid. Ensure that the lid tab
has clicked into place. The blender
will not operate if the processor lid is
not clicked in place.
7.
Plug in the processor.
8.
Always operate the blender with the
lid in place.
TO REMOVE THE
BLENDER, YOU MUST
FIRST UNLOCK AND
REMOVE THE
PROCESSOR LID (A).
THEN UNLOCK ANS
RMOVE THE BLENDER (B)
BY TWISTING
CLOCKWISE.
WARNING:
ALWAYS REMOVE THE
BLENDER AND FIT THE
SAFETY COVER (2) INTO
THE RPOCESSOR BODY
(1) WHEN USING THE
PROCESSOR.
CAUTION:
Never operate the blender with more than 42 oz. (1250 ml) of liquid or when empty.
• Recommended speed levels for blending are between 5 - Max.
• Do not overload past the MAX level on the blender.
• You can crush 10 oz. of ice cubes in 15-20 seconds in the blender.
•
To prevent spilling, do not operate the blender with more than 42 oz. (1250 ml) of liquid.
•
Avoid contact with moving parts at all times.
• Do not blend boiling liquid.
• To reduce the risk of severe injury to people or damage to the blender, keep hands, hair,
clothing as well as spatulas and other utensils out of container while blending.
1
2
1. Blender Jar
2. Blender Jar Cover
3. Chopping Blade
4. Chopping Blade
Protective Cover
Using the Blender
Rev. 08/01C
3
4
IMPORTANT:
Remove protective blade
cover(s) before use. Protective blade
covers to only be used for storage.
