Page 14
ELECTRONIC CONTROL MODULES
MANUAL
OVERRIDE
DOWN
UP
Patent #6,825,628 B2
®
TM
www
.braunability
.com
MANUAL
OVERRIDE
ST
OW
DEPLOY
®
TM
www
.braunability
.com
34858
MANUAL
OV
ERRIDE
DOWN
UP
BRAUN KNEEL
ACCESSOR
Y MODULE
100281-002
®
SN
Patent #6,825
,628 B2
®
1-800-THE L
IFT
TM
www
.braunability
.c
om
IN 10 DEPLOY
IN 9 ST
OW
KNEEL
ENABLE
34451
KNEEL
FULL
UP
KNEEL
FULL
DOWN
IN 7
IN 6
IN 5
BRAUN CONTROLLER
®
100188-001
SW REV
Patent #6,825,628 B2
®
1-800-THE LIFT
TM
www
.braunability
.com
RESET
SPEAKER
ON
OFF
SN
34452
MANUAL
OVERRID
E
ST
OW
DEPLOY
Patent #
6,825,
628 B2
®
1-800-THE LIFT
TM
www
.braunabilit
y.com
BRAUN RAMP
ACCESSOR
Y MODULE
100278-001
®
SN
RESET
DIAG
ON
OFF
SPEAKER
ENABLE
34703
INFLOOR
FOLDOUT
RAMP SELECT
SWITCH
INFLOOR
FOLDOUT
RAMP SELECT
SWITCH
KNEEL
ENABLE
KNEEL
FULL
UP
KNEEL
FULL
DOWN
IN 7
IN 6
IN 5
Patent #6,825,628 B2
®
1-800-THE LIFT
Indicator LEDs
Kneel Override
Speaker
Enable
Ramp Select Switch
Ramp Override
Computer Port
Fuse
Block
Grounding
Studs
Diagram -
Electronic Control Module Connections / Inputs / Indicators
The control module assembly is
mounted to the bottom of the pas-
senger side third row seat.
Re-
moval of this seat is prohibited.
Tip the seat forward to access the
module assembly.
Computer Port
- Laptop diagnostic
connection port to the electronic
controller.
Grounding Studs
- The controller
assembly provides two grounding
studs.
Indicator LEDs
- LED's illuminate
whenever a switch is grounded (as
labeled).
Kneel Override
- Buttons drive the
kneel system in the direction indi-
cated. The kneel LED will illumi-
nate Red when kneeling and Green
when unkneeling (raising).
Reset Button
- Resets controller.
Speaker Enable
- Turns the
internal speaker On and Off. The
speaker sounds a tone whenever
an operate signal is seen (any con-
trol switch is activated). A tone will
also sound if the ramp motor pulls
current over the controller preset
baseline current.
Ramp Select Switch
- Sets
controller functions to an in
fl
oor or
foldout ramp.
Ramp Override
- Buttons drive the
ramp in the direction indicated. The
ramp LED will illuminate Red when
deploying and Green when stowing.
Ramp
Module
Main
Controller
Kneel
Module
Reset
Button