IryPump
®
S
Rectal Irrigation - Step by Step Guide
Turn on the IryPump
®
S
to check if the battery is
properly charged.
Ring is red = IryPump
®
S
needs charging. Ring is
green = ok to begin
irrigation.
Remove the water
container from the pump
module by pressing the
side release button.
Extend the water
container. Pull the inner
section up until it
audibly clicks into position.
Fill the water container
with the advised amount
of water. Temperature
between 36°C and 38°C.
Attach the filled water
container back onto the
pump module.
Use the quick connector
to fasten the tubing
system onto the pump.
Connect the other end of
the tubing system to the
cone.
Expel all air from the
tube by turning the
control wheel to level 3.
Ensure that you are in
a comfortable position.
Lubricate the cone and
carefully insert it into the
anus.
Hold the cone in place by
applying a slight pressure
throughout the irrigation
procedure.
tip!
Use a water based
lubricant to lubricate
the cone.
