BRASSELER USA EndoSync TR-CM BSL Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 44

background image

3

Operation 2016-03-07

The warning symbols (

) and note symbols (

) that appear next to the main text on the

right hand side of the page refer to and are explained by the Warnings and Notes at the bottom
of the page.

Prevent Accidents

Do not fail to receive clear instructions concerning the various ways to use this equipment as described in this accompanying
Operator’s Manual.
Fill out and sign the warranty and give the dealer from whom you purchased the equipment his copy.

Most operation and maintenance problems result from insufficient attention being paid to basic safety precautions and not be-
ing able to foresee the possibilities of accidents. Problems and accidents are best avoided by foreseeing the possibility of dan-
ger and operating the unit in accordance with the manufacturer’s recommendations. First thoroughly read all precautions and
instructions pertaining to safety and accident prevention; then, operate the equipment with the utmost caution to prevent either
damaging the equipment itself or causing bodily injury.

The following symbols and expressions indicate the degree of danger and harm that could result from ignoring the in-
structions they accompany:

This alerts the user of important points concerning operation or the risk of equipment damage.

The user ( e.g. the hospital, clinic etc. ) is the party responsible for the maintenance and proper operation of a medical device.

This equipment must only be used by dentists and other legally licensed professionals.
Do not use this equipment for anything other than its specified dental purpose.

U.S. Federal law and Health Canada Medical Device Regulations restrict this device to sale by or on the order of a physician or
properly licensed practitioner.

This warns the user of the possibility of extremely serious injury or complete destruction of the
equipment as well as other property damage including the possibility of fire.

This warns the user of the possibility of mild injury or damage to the equipment.

Attention Customers

Prevent Accidents

«
...
2
3
4
5
6
...
»

Содержание EndoSync TR-CM BSL













































Отзывы:

Нет отзывов

Похожие инструкции для EndoSync TR-CM BSL

Бренд: Falcon Страницы: 52

Бренд: FENDT Страницы: 31

Бренд: JB Systems Страницы: 7

Бренд: 3B SCIENTIFIC PHYSICS Страницы: 36

Бренд: 3A HEALTH CARE Страницы: 16

Short/cut 2000 Audio Editor

Бренд: 360 Systems Страницы: 4

Бренд: Abbott Страницы: 2

FreeStyle Libre

Бренд: Abbott Страницы: 3

Бренд: abc Страницы: 8

Бренд: JB-Lighting Страницы: 40

Бренд: Backyard Play Systems Страницы: 74

Бренд: Bartscher Страницы: 28

Бренд: Bartscher Страницы: 13

Бренд: IBEX Страницы: 10

Бренд: M-system Страницы: 12

Бренд: Gatekeeper Страницы: 8

Bure Rise & Go DB 56-309

Бренд: Gate Страницы: 8

Бренд: Gardco Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды