Brasseler USA CARBIDE Burs Instructions for Use
P 1 of 3
IFU-0006 REV A
EDCO 11.0098
BRASSELER USA CARBIDE Burs
BRASSELER USA Carbide Burs are available in Sterile and Non-Sterile models under various trade names with numerous
head diameters and working lengths. The devices are reusable and are sterilized using steam sterilization in a gravity or
prevacuum cycle.
Description
The BRASSELER USA CARBIDE Dental Bur family includes Clinical Carbides and Laboratory Carbides. A CARBIDE dental
bur is a rotary cutting device made of stainless steel, the working end of which is made from tungsten carbide, and
which is designed to fit into a dental handpiece. Alternatively, the device may be constructed wholly from tungsten
carbide. BRASSELER USA CARBIDE Burs are reusable devices.
Intended Use
BRASSELER USA CARBIDE Burs fit into a dental handpiece, which provides the rotation, allowing the user to cut hard
structures in the mouth, e.g., teeth or bone. BRASSELER USA CARBIDE Burs can also be used to cut hard metals, plastics,
porcelains and similar materials.
Warnings and Precautions
Warning
: Attention should be paid to the speed of work (RPM)
o
Always refer to the product packaging for the Maximum RPM
o
Operating a bur with too high of an RPM may generate undesirable heat
o
Operating a bur with too high of an RPM may cause the bur to fail
•
CARBIDE Burs must be thoroughly cleaned and steam sterilized prior to the first use and each subsequent reuse
•
CARBIDE Burs labeled “Sterile” require no further action prior to first use but must be thoroughly cleaned and
steam sterilized prior to each subsequent reuse
o
If the packaging for “Sterile” labeled devices is opened or damaged, the device must be thoroughly
cleaned and steam sterilized prior to use and each subsequent reuse
•
Do not use chemical or dry heat to sterilize BRASSELER USA CARBIDE Burs, as these processes have not been
validated for use
•
Do not use worn-out or dull burs
•
Do not apply excessive pressure on the bur as this could cause undesirable heat or may cause the bur to fail
•
Avoid removing the bur at too sharp an angle to avoid leverage and breakage
•
Carefully read package labels to ensure use of the appropriate device
•
Ensure the bur is fully seated and securely gripped in the handpiece collet prior to use
•
Move the bur continuously when in use to avoid localized heating and/or damage to the bur
•
Maintain handpieces in good working condition to ensure maximum effectiveness of the device
•
Use a rubber dental dam while using CARBIDE Burs to avoid possible aspiration or swallowing
•
Always wear gloves when handling contaminated instruments
•
Eye protection must be worn to protect against eject particles
•
Surgical masks must be worn to avoid inhalation of any aerosol or dust generated
•
BRASSELER USA Bur Blocks used to hold the devices for storage and steam sterilization are not intended to
maintain sterility of the device