Branson Sonifier 250 Скачать руководство пользователя страница 50

Страница: 50 / 135

100-214-239 Rev. A

6-3

Setup and Operation

Digital Sonifier

Pulse/Pause Process Cycle

In Pulse/Pause Mode, the system applies ultrasonics (either Pulsed or not) to the sample until it reaches the

Pulse Temperature. The system then adjusts (or sets) the Pulse On/Pulse Off times for this continuing process,

in order to slow the heating process of the sample. When the experiment reaches the Maximum Temperature,

ultrasonics are turned off temporarily until the sample’s temperature drops three degrees (either Celsius or Fahr-

enheit), at which point ultrasonic treatment resumes, using the Pulse On-time/Pulse Off-time ratio calculated

by the system, until the Maximum Temperature is reached and ultrasonics are once again turned off. This pro-

cess is repeated until you manually stop the experiment or until the Time that you specified as a limit has elapsed.

While the experiment is running, the current and Maximum Temperatures are displayed and updated every sec-

ond.

Limits

You may wish to set a Time or Temperature value as a Limit for some experiments. This will cause the experi-

ment cycle to Stop if either the indicated Time has elapsed or the maximum Temperature was reached. If a Limit

is not desired, the parameter should be set to OFF.

Содержание Sonifier 250








































































































































Результаты поиска

Содержание Sonifier 250

Отзывы:

Branson Sonifier 250, Руководство пользователя, Страница: 50 / 135

Результаты поиска

Содержание Sonifier 250

Отзывы: