Branson Sonifier 250, Руководство пользователя, Страница: 19 / 135

2-6 100-214-239 Rev. A
Introduction to the Digital Sonifier
Pause Key (!H Command)
The Pause key and the !H command are active only when the unit is operating. When you press
the Pause key or type in the !H command, operation of the unit halts and the Pause key’s LED
is turned on. When you press the Pause key or type in the !H command again, the unit resumes
operation, and the LED is turned off.
Recall Key (!R Command)
The Recall key and the !R command are active only during Parameter Entry mode, except when
you are changing a parameter value. When you press the Recall key or type in the !R command,
a message is displayed and the LED is turned on. Refer to
Section 6.6, Save and Recall Presets,
on
page 6-40, for information on how to save and recall presets.
Save Key (!SV Command)
The Save key and the !SV command are active during Parameter Entry mode, except when you
are changing a parameter value. When you press the Save key or type in the !SV command, a
message is displayed and the LED is turned on. Refer to Section
Section 6.6, Save and Recall Pre-
sets,
on page 6-40, for information on how to save and recall presets.
Print/Send Key (!P and !S Commands)
The Print/Send key and the !P and !S commands are only active after a test or experiment has
been executed, and before another test or experiment begins or the Setup menu parameters are
changed. For this function to operate, a printer, a remote terminal, or both must be enabled.
When you press the Print/Send key, report data is sent to the remote terminal and to the
printer. Refer to
Section 6.7, Printing/Sending Reports,
on page 6-41, for a description of the data
that is sent to the terminal and printer.
Enter Key
You can press the Enter key on the Digital Sonifier or on the computer keyboard to:
• Cause the system to accept a modified parameter value
• Clear an error/warning message.
• Store a Setup parameter value
If you have entered a modified parameter value, the system checks the value for validity and
format. If the value you entered is valid, the value is accepted, and it replaces the old value. The
original value is lost and cannot be recovered unless it has been stored under a preset ID num-
ber. If the modified value is invalid, an appropriate error message is displayed.