Branson 9550C, Руководство пользователя

Страница: 106 / 172

5
-
22 bRANSON 9550C
BR95O507A
WORKING DEPTH ADJUSTMENT
(1) Remote Control Switch
REMOTE CONTROL SWITCH
Loosen the stopper of the handle and
fix it to the desired position.
After raising the implement, lower
push the control lever up to the stop-
per and then the implement is low-
ered the same as the working depth.
If it is raised by one touch switch,
press the one touch switch and then
the lockshaft is lowered to the posi-
tion of the control lever.
The implement is operated by one
touch switch independently with the
control lever. It is useful of turning on
the pavement.
CAUTION
Be sure that the parking brake
is applied when using the re-
mote control switch not to
cause injury by tractor move-
ment.
•
The remote control switch attached
on the fender is designed to control
the lockshaft from outside by the op-
erator. Up and Down speed is set
to slow mode, and height and depth
setting are ignored.
Never operate the remote control
switch while driving. Otherwise, there
is a risk of accident.
Hold the switch pressed to move the
lockshaft.
It is raised if the left switch is
pressed.
It is lowered if the right switch is
pressed.
It is not operated by the remote con-
trol switch while operating by the
control lever. To make it move again,
match the control lever with the posi-
tion of the lower link.
・
・