Branson 9550C, Руководство пользователя

Страница: 105 / 172

5
-
21 OPERATION & WORk
5
CAUTION
Do not drive the vehicle at a
high speed with the differen-
tial lock engaged.
•
IMPORTANT
To prevent the power train from
damage, do not engage the dif-
ferential lock when one wheel
is spinning fast and the other
wheel is stopped.
•
If the tire is rotating idle repeatedly, try
to engage the differential lock again.
ELECTRO-HYDRAULIC SYSTEM
CONTROL LEVER AND ONE
TOUCH SWITCH
The 3PT hitch control lever is used to
raise or lower the implement freely.
The lockshaft is controlled by the
control lever or one touch switch.
When raising by the one touch
switch, the lifting height is the same
as the set one by Up/Down set dia.
of the implement.
The control lever is used to raise or
lower the implement, if the lever is
pulled backward, the implement is
raised, and the lever is pushed for-
ward, the implement is lowered.
(1) 3PT Hitch Control Lever
(2) One-touch Switch
BR95O505A
(1) Stopper
TO OPERATE THE LOCKSHAFT
1. Start the engine.
2. If the lockshaft is not operated,
place the control lever equally with
the lower link position.
3. The lockshaft is operated by the
control lever or one touch switch.
BR95O463A