Branson 2000X ao, Инструкция по эксплуатации, Страница: 27 / 112

100-214-281 Rev. 07 2-1
2000X ao Actuator Chapter 2: Introduction to the 2000X ao Actuator
Instruction Manual Models Covered
Chapter 2: Introduction to the 2000X ao Actuator
2.1 Models Covered - - - - - - - - - - - - - - - - - - - - - - - - 2-1
2.1.1 Power Supply Manual Set - - - - - - - - - - - - - - - - - 2-2
2.1.2 Actuator Manual Set - - - - - - - - - - - - - - - - - - - - 2-3
2.2 Overview of this Model - - - - - - - - - - - - - - - - - - - - 2-3
2.3 Features of the System - - - - - - - - - - - - - - - - - - - - 2-4
2.4 Controls and Indicators - - - - - - - - - - - - - - - - - - - - 2-7
2.5 Welding Systems - - - - - - - - - - - - - - - - - - - - - - - 2-8
2.6 Glossary of Terms - - - - - - - - - - - - - - - - - - - - - 2-10
The 2000X ao Actuator provides motion, force, power (from the power supply), and cooling air
to the ultrasonic stack assembly. The 2000X ao Actuator is designed to work with a Branson
2000d Power Supply.
2.1 Models Covered
This manual covers the Branson 2000X ao Actuator. The 2000X ao Actuator may be found in
one of several configurations:
• An Actuator on a Column Support, Column and Ergonomic Base, also called a Stand on Base
(as seen on the following page)
• An Actuator on a Column Support, Column and Mounting Hub, sometimes called a Stand on
Hub
• An Actuator alone (not installed on a Column Support, and so on.). These are often used in
custom or automated systems that provide a means of positioning the Actuator.
This manual covers these configurations. A 2000X-series actuator requires a 2000X-series
power supply to function, and that is covered in separate manuals and user documents.
Figure 2-1 shows a Branson 2000X ao Actuator mounted on a column support which, in turn is
mounted on a column, and is supported by the ergonomic base.