Branson 2000X ao, Инструкция по эксплуатации, Страница: 18 / 112

1-6 100-214-281 Rev. 07
Chapter 1: Safety and Support
Warranty Statement, Disclaimer
1.2.2 Safety Measures and Guards
The 2000X ao Actuator, along with its 2000X-Series Power Supply, contains software-con-
trolled electronic safety devices intended to prevent the machine from operating in a fashion
harmful to the user. Start Switch and Emergency Stop controls are designed to prevent undesir-
able startup.
1.2.3 Emissions
When being processed, certain plastic materials can emit toxic fumes, gases or other emissions
that can be hazardous to the operator’s health. Where such materials are processed, proper ven-
tilation of the workstation is required. Check your materials suppliers for recommended protec-
tion when processing their materials.
CAUTION
!
Processing of many materials, such as PVC, can be hazardous to an operator’s
health and could cause corrosion/damage to the equipment. Use proper ventila-
tion and take protective measures.
1.2.4 Setting up the Workplace
Measures for setting up a workplace for safe operation of the ultrasonic welder are outlined in
Chapter 4: Installation and Setup and in the 2000 Series Installation Guide.
1.2.5 Regulatory Compliance
This product meets electrical safety requirements and EMC (Electromagnetic
Compliance) requirements for North America and the European Union.
1.3 Warranty Statement, Disclaimer
The following excerpts from the “Terms and Conditions of Sale” (found on the back of your
Invoice) are essential guidelines for the product Warranty issued with your Branson ultrasonic
welding components. The items listed in this section specifically address issues involving the
delivery, shipment, and warranty period provided. If you have any questions, please refer to the
back of the Invoice included with your system, which lists all of the Terms and Conditions of
Sale, or contact your Branson representative.