INSTRUCTIONS FOR USE
1. PREPARE THE DEVICE
Prepare the Brannock Foot-Measuring Device® as shown in the photo below. The width bar
should be set to its widest position and the arch length indicator should be slid back, so the foot
can be positioned easily on the device.
Note: Some devices have dual calibrations for the heel-to-toe, arch, and width measurements. Be sure to read the colored area which
corresponds to the calibration you are fitting.
2. POSITION THE FOOT
Have the customer remove their footwear and stand, placing thei
heel into the right heel cup. The customer should stand with equa
on both feet to ensure that the foot being measured has elongate
spread to its maximum size. Be sure the heel is properly located a
the back of the heel cup, by grasping the customer's ankle and de
r right
l weight
d and
gainst
vice
together, as illustrated in photo.
Brannock Measuring Device
