Brandt CE3610W, Инструкция по эксплуатации, Страница: 41 / 60

2/ INSTALLING YOUR APPLIANCE
BEFORE HOOK-UP
Warning:
Ensure that your appliance has
not suffered any damage during
transport (deformed seal or door, etc...). If
you see any kind of damage, before doing
anything else, contact your retailer.
In order to easily locate the reference
information for your appliance, we
recommend that you note these data on
the “After
-Sales Service Department and
Customer Relations” page.
ELECTRICAL CONNECTION
Ensure that:
- the electrical installation has efficient
voltage.
- the electrical wires are in good condition.
- the diameter of the wires complies with
the installation requirements.
- your electrical installation is equipped
with 20-ampere thermal-sensitive
protection.
In case of doubt, consult your
electrician installer.
The electrical connections are made
before the appliance is installed in its
housing.
Electrical safety must be provided by a
correct build-in. During installations and
maintenance operations, the appliance
must be unplugged from the electrical
grid.
The power plug or any other power cut
device must stay immediately accessible
for an emergency stop.
If the oven presents any anomaly, unplug
the appliance or disconnect the connexion
to the sector.
If the plug cord is damaged, it must be
replaced by the manufacturer, its after-
sale service, or a similar qualified person
to avoid any danger.
Warning:
We cannot be held responsible
for any accident resulting from an
inexistent, defective or incorrect ground
lead.
40