Brandt BPI6413BM, Руководство по установке и использованию

Страница: 26 / 32

26
PRODUCTS/ACCESSORIES
TO BE USED
. Small, hard-bristled brush.
. Safety pin
. Gentle scrubbing cream.
. Cleaning sponge
. Cleaning sponge
. Special vitroceramic glass
products (e.g.: Cera-clean).
- Cleaning sponge.
- Special vitroceramic glass
products (e.g.: Cera-clean).
Warning
- Never clean your appliance while it is in operation. Set all the electric
and gas controls to zero.
- If a crack appears in the surface of the glass disconnect your appliance
immediately to prevent a risk of electric shock. Contact the After-Sales
Service Department.
Tips
— It is better to clean the parts of the hob by hand rather than in the dishwasher.
— Do not use an abrasive sponge to clean your hob.
— Do not use steam cleaning.
MAINTAINING YOUR APPLIANCE •
MAINTENANCE......
Of the spark
plugs and
injectors
Of the pan
supports and gas
burners
Of the induction
cooking plates
Of the glass
worktop
WHAT TO DO
In the event that the spark plugs become
soiled, clean them using a small, hard-
bristled brush (non-metallic).
The gas injector is located in the centre
of the burner in the form of a crucible. Be
careful not to obstruct it during cleaning,
as this will undermine the performance
of your hob. In the event of obstruction,
use a safety pin to unclog the injector.
If tough stains occur, use a non-abrasive
cream, then rinse with clean water.
Carefully wipe each part of the burner
before using your hob again.
- Clean with warm water and then wipe.
If necessary finish with the scouring side
of a sponge then wipe.
- For tough stains, use products
designed for vitroceramic glass
(example opposite).
- Clean with warm water and then wipe.
For tough stains, use products designed
for vitroceramic glass.
3 / DAILY CARE OF YOUR APPLIANCE EN