Brandt BPI6413BM, Руководство по установке и использованию

Страница: 13 / 32

13
1/ INSTALLING YOUR APPLIANCE EN
• • ELECTRIC CONNECTION
The appliance must be plugged
in using a standardized power
cable with 3 conductors each
1.5 mm² ( 1 ph + 1 N +
ground) which must be
connected to the 220~240 Volt
network by means of a
standardized IEC 60083 power
socket or a single-pole cut-off
device in compliance with
installation regulations. The
safety wire (green-yellow) is
connected to the appliance's
ground terminal and must be
connected to the installation's
ground lead.
The plug of the electrical outlet
must be accessible after
installation.
— Connect the wires to the
electricity supply making sure
that the different-coloured wires
are in the right order (Fig. 01).
Warning
— The safety wire (green/yellow) is connected to the appliance’s ground terminal
and must be connected to the ground terminal of the electricity supply.
— If the power cable is damaged, it must be replaced by the manufacturer, its After-
Sales Service Department or a similarly qualifiied person to avoid danger.
— If a cooking hob is used that is not connected to the ground or has a faulty ground
electrode, the manufacturer’s liability shall under no circumstances be incurred in the
event of an incident or for any of its consequences.
Neutral
(N)
Live
(L)
Blue wire
Black, brown
or red wire
Green/yellow wire
Fig. 01
C
ROSS
-
SECTION OF CABLE TO BE USED
H05V2V2F cable
Cross-section of
conductors in mm
2
Fuse
220-240 V~ - 50 Hz
3 conductors
including
1 ground
1,5
16 A
Cable type
H05V2V2F
Ground