Brandt BPG6308 Series, Руководство по установке и использованию

Страница: 13 / 24

13
2 / INSTALLING YOUR APPLIANCE
• CHANGING THE TYPE OF GAS

SWITCHING FROM TOWN GAS TO
LPG GAS
Connecting the gas supply LPG
connection - gas supplied by
tank or cylinder.
Warning
Your appliance is sold pre-set for
TOWNGAS. The injectors required for
adapting it to LPG can be found in the
plastic bag containing this guide.
For your safety, you must choose this
connection :
Connection with a reinforced rubber
hose with screw-on mechanical
connectors.
In an existing system, a soft pipe fi tted with
clamps whose service life is fi ve years may
be used. It is necessary in this case to use
an adapter without forgetting to fi t a sealing
washer between the adapter and the hob’s
elbow.
Tip
You can obtain the adaptor and
the sealing washer from your After-
sales Service Department.
A
Seal (not provided)
B
Adaptor (not provided)
C
Clamp (not provided)
A
C
B
For Singapore : LPG Connection
The gasket depicted in the diagram on
the right is to prevent gas leakage. After
installation, turn on the gas supply and use
soap solution (never use naked fl ame) to
check for gas leakage.
ring
nozzle
elbow joint
rubber hose
gasket
To change the type of gas, you should
successively :

Change the injectors

Adjust the retarder on the taps