Installation
Environment
7
Installation
CHOICE OF LOCATION AND BUILDING IN
The material of the cabinet supporting the
appliance must be heat resistant (or covered
with a heat-resistant material).
his appliance may be installed in a cabinet
column.
Drill a 2 mm diameter hole in the cabinet panel
to avoid splitting the wood.
For greater stability, attach the oven to the
unit with 2 screws through the holes provided
on the side panels
Warning
This appliance must be installed more than
850 mm up off the ground. This appliance may
be installed in a cabinet column, as indicated on
the installation diagram
(fig. A)
.
Caution: if the back of the cabinet is open, the
space between the wall and the surface on which
the oven rests must be no more than 70 mm*
(
fig. B
).
447
550
547
550
450
A
B
Tips:
Installation should only be performed by
qualified installers and technicians.
