Installing your device
Environment and energy saving
7
Installing your device
CHOICE OF LOCATION AND FITTING
The diagrams determine the dimensions of a
piece of furniture that will accommodate your
oven. This device can be installed either in
column (A) or under plan (B). If the cabinet
is open, its opening must be 70 mm maximum
at the back (C and D). Secure the oven in the
cabinet. To do this, remove the rubber stops
and pre-drill a Ø 2 mm hole in the wall of the
furniture to prevent the wood from splintering.
Secure the oven with the 2 screws.
Replace the rubber stops.
Tip
To be certain that you have properly ins-
talled your appliance, do not hesitate to call
on a household appliance specialist.
Warning :
If the electrical installation in your residence
requires any changes in order to hook up
your appliance, contact a professional elec-
trician.If the oven malfunctions in any way,
unplug the appliance or remove the fuse cor-
responding to the sector where the oven is
hooked up.
447
550
547
550
450
A
B
Warning :
This device must be installed more than
850 mm from the ground. It can be ins-
talled in column as shown on the installa-
tion diagram (fig. A).
If the bottom of the furniture is open, the
space between the wall and the board on
which the oven rests must be a maximum
of 70 mm (fig.B).
