Brandt 1912720, Инструкции по эксплуатации и монтажу

Страница: 37 / 77

36
Manipulating the thermostat
To adjust the temperature, set the thermostat
knob on one of the surrounding figures (the
ON light illuminates). Position 1 corresponds to
the least cold setting: the higher the number,
the colder the temperature setting. When the
thermostat is in position
, your refrigerator
is off (the ON light is out).
The appliance is always powered.
Temperature indicator and
"Cold Zone" symbols
You will find the symbol opposite
in your refrigerator. It clearly
shows the location of your
appliance's coldest zone: the temperature
here is +4°C or less. A temperature indicator
here enables you to check that your refrigera-
tor is working correctly.
Prolonged opening of the door will
cause the internal temperature to
rise. You must therefore read the
indicator within 30 seconds of the
door being opened for the reading
to be correct.
Setting the temperature
When putting your appliance into service, set
the thermostat to a medium position.
Check the temperature indicator 4 hours after
putting your appliance into service, or after
any change in the thermostat setting, observe
the temperature light (Drawing 1):
- If the indicator is still black, lower the temper-
ature gradually by selecting a higher number
around the thermostat and checking the
temperature indicator again after 4 hours.
Repeat this operation as many times as neces-
sary.
- If the indicator goes green and "OK" is
indicated, the temperature in your refrigerator
is correctly
Your refrigerator's internal temper-
ature is closely linked to the ambi-
ent temperature, how frequently
the door is opened and the amount
and temperature of the food you
have put in your refrigerator. You
must therefore check the tempera-
ture indicator regularly and adjust
the setting if necessary, as ex-
plained above.
If the ambient temperature is very
low, we recommend that you keep
the Quick Freeze button pressed in.
Setting your refrigerator’s temperature
EN
Thermostat
Quick freeze button Yellow LED - quick freeze
Green LED - ON
Light switch
Temp. to set Correct temp.
Drawing 1 - Temperature indicator