INSTALLATION INSTRUCTIONS
Install Camera
Step 1: Loosen lug nuts to remove spare tire.
Step 2: Slide Camera on studs placing harness end
inside of tire carrier.
Do not run harness through the
camera bracket opening
.
Step 3: Adjust Camera head to fit your specific wheel.
Bracket is shipped in factory wheel configuration.
Adjustment Bracket for Camera Clearance using Phillips
Screwdriver and 3/8” Wrench or Socket Drive
Note: Short Bracket has been designed for Factory
offset wheels. Use the Long Bracket for wheels with
larger offsets.
Step 4: Remove spare tire and slide (3) supplied Push
Nuts on the studs.
9002-8848 Instructions 6-10-19
Page 2 of
7
KB
