BrandMotion 9002-7752, Руководство по установке

Страница: 1 / 7

! INSTALLATION!INSTRUCTIONS!
Display Radio Camera Interface
Harness (Kit # 9002-
7
75
2
)
Please read thoroughly before starting installation and check that kit contents are complete.
Items Included in the Kit: Tools & Supplies Needed:
Interface module
Ford MyTouch harness
OBDII connector harness
OBDII flash module 7mm socket
8mm socket
Phillips screw driver
Wire strippers
Wire cutters
Electrical tape or Heat shrink
Safety Precautions:
•
Work in well ventilated area that is clear of obstructions.
•
Secure vehicle with tire chucks in both front and rear of tires.
•
Turn vehicle accessories OFF and ensure ignition key is in OFF position.
•
Wear safety goggles and snug fitting clothes.
•
Use tools only for their intended purpose and which are in good repair.
•
Only perform this task if confidence, skill, and physical ability permit.
NOTE: We strive to provide accurate and up-to-date installation instructions.
1. Remove the trim around the screen/display
in the dash.
2. Remove the (4) 7mm bolts holding in the
screen/display. Pull screen forward out of
dash.