INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
9002-2906v2 Instructions 12-5-17
Page 1 of 3
JM
Dual Camera Blind Spot Monitoring System
W/7.3 Display Mirror
(Kit # 9002-2906v2)
Please read thoroughly before starting installation and check that kit contents are complete.
Items Included in the Kit:
Tools & Supplies Needed:
2 Adjustable angle camera pods
2 Chassis harness
2 Double sided tape/gaskets
Mounting screws
4 Screw hole caps
2 Angle adjustment tools
7.3” display mirror w/harness
Mirror remote
These instructions
Wire strippers
Wire cutters
Electrical tape
Zip ties
Plastic panel removal tools
Digital Volt Meter / BCM safe test light
Screwdriver
Socket set
Wrench
Safety Precautions:
•
Work in well ventilated area that is clear of obstructions.
•
Secure vehicle with tire chucks in both front and rear of tires.
•
Turn vehicle accessories OFF and ensure ignition key is in OFF position.
•
Wear safety goggles and snug fitting clothes.
•
Use tools only for their intended purpose and which are in good repair.
•
Only perform this task if confidence, skill, and physical ability permit.
NOTE: We strive to provide accurate and up-to-date installation instructions. For the latest full color
instructions, as well as an installation video, please visit www.brandmotion.com
