INSTALLATION!INSTRUCTIONS!
THIS CONNECTOR REQUIRES 9002-2773
Interface for BMW with Dynamic Park Lines
(Kit # 9002-2773)
Please read thoroughly before starting installation and check that kit contents are complete.
Items Included in the Kit:
Tools & Supplies Needed:
9002-2773 module
Camera/power input T-harness
LCD Video cable
IR eye harness (not used)
RGB harness (not used)
Remote
These instructions
Wire strippers
Wire cutters
Electrical tape
Zip ties
Plastic panel removal tools
Screwdriver
Socket set
Wrench
Torx driver set
Safety Precautions:
•
Work in well ventilated area that is clear of obstructions.
•
Secure vehicle with tire chucks in both front and rear of tires.
•
Turn vehicle accessories OFF and ensure ignition key is in OFF position.
•
Wear safety goggles and snug fitting clothes.
•
Use tools only for their intended purpose and which are in good repair.
•
Only perform this task if confidence, skill, and physical ability permit.
THIS CONNECTOR REQUIRES 9002-2774
