INSTALLATION INSTRUCTIONS
9002-2772 v1 11-7-2016.doc
Page 1 of 2
GS
Audi Dual Video Input Interface for Factory Display Radios
(Internal MMI Knob)
(Kit # 9002-2772)
Please read thoroughly before starting installation and check that kit contents are complete.
Items Included in the Kit:
Tools & Supplies Needed:
9002-2772 interface
LVDS 10-pin input video cable
LVDS 10-pin output video cable
Power/CAN, back-up camera input harness
IR eye harness
Remote
RGB harness (not used)
Input toggle harness (not used)
Aux Video input harness
Wire strippers
Wire cutters
Electrical tape
Zip ties
Plastic panel removal tools
Screwdriver
Socket set
Wrench
Safety Precautions:
•
Work in well ventilated area that is clear of obstructions.
•
Secure vehicle with tire chucks in both front and rear of tires.
•
Turn vehicle accessories OFF and ensure ignition key is in OFF position.
•
Wear safety goggles and snug fitting clothes.
•
Use tools only for their intended purpose and which are in good repair.
•
Only perform this task if confidence, skill, and physical ability permit.
NOTE: We strive to provide accurate and up-to-date installation instructions. For the latest full color
instructions, as well as an installation video, please visit www.brandmotion.com
