Volume Control
To increase the volume press “Button #2”. To decrease volume press
“Button #3”.
Play & Pause
To play your music press “Button #1” once. To pause your music press
“Button #1” once again.
Next Song
Press & Hold “Button #2” for 3 sec. to fast forward to the next song.
Previous Song
Press & Hold “Button #3” for 3 sec. to go back to the previous song.
Voice Dialing
Please ensure your mobile phone supports voice dialing function and
has the voice tag assigned for this feature.
1. Press & Hold “Button #2” or “Button #3” for 3 sec. to activate voice
dialing.
2. Press & Hold “Button #2” or “Button #3” for 3 sec. again to deactivate
voice dialing.
Note: Depending on your mobile phone model, this operation may
vary.
Pairing
Before using your BLU-100 headset for the first time, you need to pair it
with your Bluetooth enabled phone.
1. Turn OFF your BLU-100. Press & Hold “Button #1” for ~5 sec. until the
White Indication Light starts flashing. You will hear a voice say
“Pairing”. Your headset is now under pairing mode.
2. Activate your mobile phone’s Bluetooth mode to find your headset.
3. Your phone will detect “BLU-100”. By pressing “BLU-100” on your
phone a voice will say “Connecting”. Your headset and mobile
phone are now connected.
If prompted for a password, please enter “0000”.
IMPORTANT: If the pairing can’t be completed within 90 sec. while the
pairing mode is activated, the pairing was unsuccessful. Please start
over and follow step 1 - 3 under “Pairing” again.
Pairing with 2 Devices (Multipoint Connection)
Your Brainwavz BLU-100 headset supports a Multipoint Function to
allow simultaneous pairing with two mobile phones.
1. Follow Step 1 to 3 under “Pairing” to pair your BLU-100 with your 1st
mobile phone.
2. Turn OFF your BLU-100 headset.
3. Follow Step 1 to 3 under “Pairing” to pair your BLU-100 headset with
your 2nd mobile phone.
Power ON/ OFF
1. To turn on your BLU-100 Headset Press & Hold “Button #1” for 3 sec.
The White Indication Light of your headset will be flashing for 1 sec. and
you will hear a voice say “Power ON”.
Your BLU-100 Headset is now turned on.
2. To turn off your BLU-100 Headset Press & Hold “Button #1” for 2 sec.
The White Indication Light of your headset will turn off and you will hear
a voice say “Power OFF”. Your BLU-100 Headset is now turned off.
Charging
When you hear A voice say “Battery Low”, please charge your headset
with the provided Micro USB Charging Cable.
1. Open the USB Back Cover on the RIGHT Earphone Head of your
BLU-100 Earphones and connect the Micro USB plug of your
charging cable.
2. Connect the USB plug on other end of your charging cable to a
computer or a USB power socket.
When charging your headset, the White Indication Light on your remote
control will turn on. Once your BLU-100 headset is fully charged, the
White Indication Light will turn off.
4
3
2
1
Button #3 “
-
”
4
Button #1
3
Button #2 “
+
”
2
White Indication Light
1
Bluetooth 4.0 Earphones
User Manual & Warranty Card
BRAINWAVZ
BRAINWAVZ
