manualshive.com logo in svg

Brainlab CRANIAL/ENT OPTICAL TRACKING, Руководство пользователя прибора

Поделиться
Скачать
Brainlab CRANIAL/ENT OPTICAL TRACKING Скачать руководство пользователя страница 60

5.3

Vario Reference Arm (Mayfield Headholder)

Introduction

The 

Vario Reference Arm (Mayfield Headholder)

 (52001) creates a flexible and extended

attachment of the 

Standard Cranial Reference Array

 onto the Mayfield Modified Skull Clamp.

Compatible Reference Arrays

Name

Article No.

Standard Cranial Reference Array with 4 Marker Spheres

41725

How to Attach the Array to the Reference Arm

①

②

③

④

⑤

Figure 21  

Step

1.

Attach the unsterile 

Standard Cranial Reference Array

 

⑤

 to the array connector 

③

, se-

curing it with the fixation nut 

④

.

2.

To position the array, turn the central tension handle 

②

 

counterclockwise

 to loosen it.

3.

Adjust the arm 

①

 to the desired position and securely re-tighten the handle by turning it

clockwise

.

Loosening the Arm

Warning

Do not grip the Vario Reference Arm (Mayfield Headholder) at the ball joints while the
central tension handle is unfastened as you could injure your fingers.

Warning

Never loosen the central tension handle without gripping the articulated arm with your
other hand. The Vario Reference Arm could fall on the patient.

Warning

Loosen the mechanism by turning the central tension handle counterclockwise until it
stops and avoid using any additional force. Hold the articulated arm firmly with one hand

Vario Reference Arm (Mayfield Headholder)

60

Instrument User Guide Rev. 2.6 Cranial/ENT Optical Tracking

Содержание CRANIAL/ENT OPTICAL TRACKING

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды