manualshive.com logo in svg

Brainlab CRANIAL/ENT OPTICAL TRACKING, Руководство пользователя прибора

Поделиться
Скачать
Brainlab CRANIAL/ENT OPTICAL TRACKING Скачать руководство пользователя страница 22

3.1.1

Using Marker Spheres

Ensuring Navigation Accuracy

Navigation accuracy critically depends on the condition of the marker spheres used.

Warning

Only use clean and dry marker spheres. Wet or soiled marker spheres must either be
cleaned and dried before further use, or replaced.

Warning

Do not use defective or deformed marker spheres as this could affect navigation accuracy,
posing a risk to the patient.

Warning

Set up the OR prior to surgery to ensure that the camera has an unobstructed view of all
marker spheres on the instrument adapters and reference arrays. Do not mask or cover
any marker spheres, otherwise navigation is not possible or may be inaccurate.

Cleaning Marker Spheres

Warning

To clean the surface of soiled marker spheres, use a soft cloth moistened with sterile water
only. Ensure that the cleaned marker sphere is absolutely dry before use.

NOTE: If you clean or replace a marker sphere on an instrument or reference array, verify
navigation accuracy before continuing.

 

Attaching Marker Spheres

Figure 2  

Step

Tightly screw a marker sphere by hand onto each attachment pin of the instrument.

Ensuring Secure Attachment

Warning

Ensure that marker spheres are screwed onto the pin until there is no gap between the
sphere and the base of the pin. Do not use a marker sphere if it is not securely attached in
this position.

Using Marker Spheres

22

Instrument User Guide Rev. 2.6 Cranial/ENT Optical Tracking

Содержание CRANIAL/ENT OPTICAL TRACKING

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды