Brainlab CRANIAL/ENT OPTICAL TRACKING Скачать руководство пользователя страница 103

Страница: 103 / 112

9 MICROSCOPES

9.1

Microscope Adapter Sets

General Information

Microscopes from various manufacturers can be set up for use with Brainlab navigation systems.

The navigation system is able to acquire the viewing direction, the focus point, and the field of
view diameter of the microscope and display the information on the navigation screen.

To set up a microscope:

• A

Microscope Adapter Set

must be attached to the microscope

• The microscope must be connected to the navigation system

Before Using

Read the

Software User Guide

before performing microscope navigation.

Cabling

Warning

Do not connect additional hardware to the original setting after calibration.

Warning

Do not connect devices other than a valid calibrated video camera to the video port of the
navigation system.

Warning

Make sure that there is enough space for the movement range of the microscope head
when connecting it.

MICROSCOPES

Instrument User Guide Rev. 2.6 Cranial/ENT Optical Tracking

103

Содержание CRANIAL/ENT OPTICAL TRACKING
















































































































Результаты поиска

Содержание CRANIAL/ENT OPTICAL TRACKING

Отзывы:

Бренды по названию

Популярные бренды

Brainlab CRANIAL/ENT OPTICAL TRACKING, Руководство пользователя прибора

Результаты поиска

Содержание CRANIAL/ENT OPTICAL TRACKING

Отзывы:

Бренды по названию

Популярные бренды