10
User Manual
5
Operation
5.1
Preparation
Slide lever to the left to fold down the cutter unit.
1
2
Insert labels for tear-off mode
Instructions of the printer.
Place the media strip between the printhead and the drive roller, so that the front edge of the strip reaches through the
cutter.
Insert ribbon
Instructions of the printer.
Fold up and lock the cutter unit (2).
Activate the cut mode in the software.
In direct programming use the "C" command.
Programming Manual of the printer.
Configure the cut parameters
i
Note!
The cut parameters are only accessible with cutter installed.
