background image

215-1706 Rev. A EN 11-03-001A
© 2011 Bradley Corporation
Page 1 of 4 

8/23/2011

P.O. Box 309, Menomonee Falls, WI  USA  53052-0309
PHONE 800.BRADLEY (800.272.3539)  FAX 262.251.5817

bradleycorp.com

Installation 

IMPORTANT!

Read this entire installation manual to ensure proper installation. When 
fi nished with the installation, fi le this manual with the owner or maintenance 
department. Compliance and conformity to local codes and ordinances is 
the responsibility of the installer.

Separate parts from packaging and make sure all parts are accounted for 
before discarding packaging material. If any parts are missing, do not begin 
installation until you obtain the missing parts.

Make sure that all water supply lines have been fl ushed and then completely 
turned off before beginning installation. Debris in supply lines can cause 
valves to malfunction.

Product warranties may be found under “Products” on our web site at 
bradleycorp.com.

Installation

THIS
SIDE

UP

Packing List




Wall-Saver Shower

 WS-2WMD, WS-3WMT

Supplies Required ................................................. 2
Dimensions ............................................................ 2
Installation ............................................................. 3
Optional Vertical Shroud Installation ...................... 3
Optional Horizontal Shroud Installation ................. 4
Cleaning Instructions ............................................. 4

WS-2WMD

WS-3WMT

Содержание WS-3WMT

Страница 1: ...s from packaging and make sure all parts are accounted for before discarding packaging material If any parts are missing do not begin installation until you obtain the missing parts Make sure that all water supply lines have been flushed and then completely turned off before beginning installation Debris in supply lines can cause valves to malfunction Product warranties may be found under Products...

Страница 2: ...kets OPTIONAL 3 4 union Dimensions mm Rough in supply lines before making connections Use the Cold Inlet for Tempered Supply C L Recommended Shower Height from Showerhead tip to finished floor Age Male Female Adult 6 0 1 83m 5 6 1 68m Teen 6 0 1 83m 5 6 1 68m Pre Teen 5 6 1 68m 5 6 1 68m Distance to finished floor 2 51 Mounting Bracket Mounting Bracket Supply from Wall Anchor Holes Anchor Holes 11...

Страница 3: ... to lower bracket with screws provided Using holes on top of shroud as guides drill and tap 10 24 holes in Slip Ring Secure Shroud to Slip Ring D Connect water supply to copper tubes inside the shower unit Turn on water to your shower and check for leaks Attach top and bottom covers C Drill 1 4 holes on marked line and attach mounting brackets to wall using suitable hardware Hang unit on brackets ...

Страница 4: ...polish in accordance with the manufactures instructions Many of these products leave a protective coating that helps prevent future smears and fingerprints Grease and Oil To remove grease and oil use a quality commercial detergent or caustic cleaner Apply in accordance to the manufactures instructions and in the direction of the polish lines Precautions Avoid prolonged contact with chlorides bleac...

Отзывы: