3
Installation
S19-270HC, S19-270JC
Bradley Corporation • 215-1434 Rev. H; EN 07-523A
1/15/08
Installation
Supplies Required:
• 1/2" NPT water supply to inlet on eyewash
• Bolts for cabinet mounting
• Pipe sealant
• Sign-mounting hardware
Step 1: Rough-in
NOTE: Flush the water supply before installation.
1. Rough-in wall opening to the dimensions shown in Figure
1.
2. Rough-in 1/2" NPT water supply at the dimensions shown
in Figure 2.
3. Position unit in wall opening and mount eyewash in wall with four bolts (supplied by installer)
at the locations shown in Figure 2.
4. With cabinet door open, connect supply line using the coupling nut and combination tailpiece.
Refer to Figure 3a on page 4 (for S19-270HC) or Figure 3b on page 5 (for S19-270JC).
5. Mount the safety sign to the wall with appropriate hardware supplied by the installer.
Figure 1
Figure 2