background image

HOW TO USE

B

PLEASE READ INSTRUCTIONS COMPLETELY BEFORE USING THIS DEVICE

A

IMPORTANT NOTE 

CARE AND SAFETY INFORMATION

C 

PRODUCT PARTS AND CONTROLS

PwrUp Clean

 Wireless Phone Charger and Sterilizer

TM

BT2-712-2/BT2-751-2

1. 

Plug it in:

 Plug the Micro-USB end of the included power cable into the back of the PwrUp Clean. Plug the other end into a 

standard 110V household electrical outlet.

2. 

Insert device:

 Open the lid and set your phone (face up) inside the housing. For specific phone models that can charge 

wirelessly, be sure that your phone is centered inside the PwrUp Clean. You will know your phone is aligned properly when 

the phone starts to charge. Charging time for your phone will vary, depending on your phone’s battery level. (It is not 

necessary to run the sterilization process in order to charge your phone.)

3. 

Sterilize:

 With the phone inserted in the housing, close the lid and press “DISINFECTION” to begin the ultraviolet sterilization 

process. Status indicator will show the progress of the sterilization process, which takes 5-10 minutes. Once the sterilization 

process is complete, open the lid and remove your device. Or, after the sterilization process is complete, you may let your 

phone continue to charge in the housing for as long as necessary. Note: We do not recommend opening the lid or removing 

your device prior to the completion of the sterilization process. 

4. 

Aromatherapy:

 Open the lid and add a few drops of aromatherapy essential oil (not included) to the aromatherapy socket 

in the upper left corner of the housing. Then set your phone in the housing, close the lid and press “AROMATHERAPY”. The 

aromatherapy process takes 5-10 minutes.

• A soft cloth or a paper towel may be used to clean this device. Unplug the device from its power source before 

cleaning. Do not use excess water or any kind of cleaning solvents when cleaning the device.

• Keep the device away from fire sources, wet or high-moisture conditions, and corrosive or flammable chemicals.

• Close the device’s lid before starting the sterilization cycle and keep the lid closed during the entire sterilization 

cycle. Do not look directly at the ultraviolet lamp when illuminated.

For more information, please visit www.Bracketron.com

Ultraviolet light

Wireless charging area

Progress indicator lights

AROMATHERAPY  button

Aromatherapy socket

Power input

DISINFECTION button

Отзывы: