FEATURES
B
SETUP INSTRUCTIONS
C
BLUETOOTH PAIRING
D
PLEASE READ INSTRUCTIONS COMPLETELY BEFORE USING THIS DEVICE
E
CONNECTING ADDITIONAL DEVICES
Roadtripper VOICE
Car Audio Bluetooth
®
FM Transmitter™
BT5-767-2
1. To avoid audio feedback while on phone calls, do not turn the radio volume too high.
2. Although the transmission power of this product is relatively strong, be sure to select a
frequency that is not used in your area. You may need to try a few different frequencies to get
the best sound quality.
3. Do not use the product in extremely high or low temperatures and in dusty or humid environments.
4. Avoid dropping the product to prevent damage.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
• Suitable for all types of vehicles
• LED display
• Supports QC3.0 fast charge output
• Supports iPhone and iPad charging
• Supports stereo FM transmission technology
• Supports music play from USB flash drive
• Supports music play from MicroSD card
• Supports WMA, MP3, WAV, APE, FLAC music
file formats
• Automatic power off memory function
• Supports Bluetooth A2DP, AVRCP, HFP, HSP
• Bluetooth V5.0
• Bluetooth hands-free calling
• Supports Bluetooth stereo music DSP technology
• Echo and Noise Reduction (CVC) technology
1. Plug the Roadtripper VOICE into your car’s 12-volt socket. It will turn on and the LED display will
read “HI”
➔
Battery Voltage
➔
“bt”
➔
FM frequency.
2. Turn on your car’s FM radio and tune it to an unused FM frequency.
3. Adjust the FM frequency of the Roadtripper VOICE to match the frequency shown on your car
radio. To adjust the FM frequency:
• Long press
}}
I to enter FM frequency adjustment mode (the digital radio station frequency on
the LED display will start to blink).
• Then press I
||
and
}}
I to adjust the frequency from 87.5 to 108.0 Mhz. Remember to select an
open frequency where there is no radio broadcast. It may take several tries on different
frequencies to get clear reception and the best sound quality.
• When the desired frequency is set on the display, wait three seconds without operation to exit
the FM frequency adjustment mode.
When the vehicle’s ignition is turned on, the Roadtripper VOICE will automatically connect only
to the paired device that was connected last time. To connect a different phone or other device,
follow the pairing instructions above.
Note:
Some phones can be automatically connected with the Roadtripper VOICE when it is
powered on again. Some phones may not automatically connect, and some phones may need to
grant permission for each connection. You can set your phone to “Auto-connect”. For more
information, please refer to the phone's user manual.
When connecting the product with the mobile phone for the first time, it may need a pin code to
finish the connection (usually 0000 or 1234).
1. Switch on Bluetooth on your mobile phone and search for the device “BT Voice” from the
phone’s list of available Bluetooth devices.
2. Choose the device “BT Voice”.
3. Allow the phone and FM transmitter to pair.
4. You are now ready to use your Roadtripper VOICE.
F
HANDS-FREE CALLS THROUGH BLUETOOTH
G
PLAYING MUSIC
I
TIPS AND TRICKS
When your Bluetooth device is idle or playing music:
1. Make a call: In the connected state, dial the phone number using the mobile phone. The sound
from the call is automatically sent to the car audio speaker.
2. Answer a call: In the connected state, when a call is being received, press to answer the call.
Once the call has been answered, press the I
||
button or the
}}
I button to switch between
Bluetooth and the hands-free phone. To end the call, press the button again.
3. Reject a call: When a call is being received but you don’t want to answer it, press and hold the
button to reject the call.
4. Redial a call: When the Bluetooth device is powered on but idle, double-press the button to
redial the last phone number called.
The Roadtripper VOICE supports A2DP functionality and can stream music stored in a connected
phone, on a USB flash drive, or on a MicroSD card, to the car stereo through FM transmission. With
the Roadtripper VOICE tuned to the same frequency as your car radio, select your source of music
(Bluetooth device, USB flash drive or MicroSD card) by long-pressing the
M
button to switch the
mode: “bt”
➔
“USb”
➔
“tf”. Use the button to control music playback (play/pause). Use the I
||
and
}}
I buttons to select the previous or next song.
If streaming music from a Bluetooth device, select the song to play from the phone. If a USB flash drive
or MicroSD card is inserted into the Roadtripper VOICE, it will automatically read and play the music.
H
SIRI®/VOICE ASSISTANT FUNCTION
After a Bluetooth device is paired, press and hold the button for 3 seconds to activate Siri/voice
assistant. You will be able to activate some if not all apps or commands you can usually perform with
a voice assistant such as maps, searching for music, etc. (Supported mobile phone brands are iPhone,
Samsung, and native Android system mobile phones.
Note:
Some phones do not support this feature.)
1. LED Display
2. Microphone
3. LED light
4. Short press: Play/Pause/
Hands-free/Redial. Long press:
Enter Siri®/Voice assistant. Left
and right rotation: Reduce or
increase volume
5. Light control button. Short
press: Change LED color. Long
press: Change LED mode.
6. MicroSD card slot
7. Short press: Previous song.
Long press: Adjust FM
frequency down.
8. Short press: Next song. Long
press: Enter FM frequency
adjustment mode or adjust
FM frequency up.
9. Mode button (Bluetooth/
USB/SD)
10. USB port for flash drive
11. USB port (QC3.0) for
charging devices
IMPORTANT NOTE
IMPORTANT!
DO NOT RETURN PRODUCT TO THE RETAILER. IF YOU NEED ASSISTANCE OR REPLACEMENT PARTS,
CALL US TOLL FREE: 1-866-237-4443 HOURS MON-FRI 9AM-5PM(CT)
Bracketron, Inc. warrants this product against defects in material or workmanship for a period of one (1)
year from the date of purchase. Bracketron, at its option, may repair or replace with new or refurbished
product, any product which Bracketron determines to be defective. “Refurbished” means any product that
has been returned to its original specifications. To obtain warranty services, you must deliver the product,
freight prepaid, to Bracketron, Inc. at 5624 Lincoln Dr., Edina, MN 55436. A dated purchase receipt MUST
accompany the returned product. This Limited Warranty shall apply to any repair or replacement product
for the remainder of the original Limited Warranty or for a period of ninety (90) days—whichever is longer.
BRACKETRON SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH
OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. FURTHER, EXCEPT TO THE EXTENT PROHIBITED
BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
LIMITED WARRANTY
A
PRODUCT CONTROLS
REV082619
