
Commissioning • Installation
Chapter 3
Com
m
is
sio
ning
75
Automation PC 820 User's Manual V 1.00
Chapter 3 • Commissioning
1. Installation
Generally, the APC820 must be mounted to the first position regardless of mounting method. It
is important to make sure that it is correctly fastened to the guide rail.
1.1 Important mounting information
•
The APC820 must be secured to the first position of the ACOPOSmulti mounting plate.
•
The environmental conditions must be taken into consideration.
•
The APC820 is only permitted for operation in closed rooms.
•
The APC820 cannot be situated in direct sunlight.
•
The vent holes may not be covered.
•
When connecting certain cable types (DVI, SDL, USB, etc.), keep the flex radius of the
cable in mind (see section 2 "Cable connections" on page 81).
Figure 23: Installation
Feed-through installation
Cold-plate installation
Содержание Automation PC 820
