manualshive.com logo in svg

BR-Automation Automation PC 820, Руководство пользователя, Страница: 23 / 252

Поделиться
Скачать
BR-Automation Automation PC 820 Скачать руководство пользователя страница 23

Technical data • Introduction

Chap

ter 2

Te

chn

ica

l da

ta

23

Automation PC 820 User's Manual V 1.00

Chapter 2 • Technical data

1. Introduction

The ultra-compact, integrated ACOPOSmulti solution offers the most cost-effective solution
possible for machines with multiple axes. The modular cooling concept that can be flexibly
adapted to any installation, the user-friendly cabling, as well as the compactness and scalability
of the performance are all factors that make the ACOPOSmulti so easy to use.

The Automation PC 820 was developed for the ACOPOSmulti system and is equipped on the
machine for rough environmental conditions. Because the APC820 can be completely integrated
into the ACOPOSmulti system, the space otherwise needed for the PC is no longer occupied in
the switching cabinet. The APC820 was designed for the toughest environments. Not a single
internal cable connection was used during construction. This has made it possible to achieve
maximum vibration resistance and operational safety. Free of any rotating parts, CompactFlash
cards are the optimum storage media for use in the machine.

Содержание Automation PC 820





























































































































































































































































Отзывы:

Нет отзывов