BR-Automation Automation PC 820, Руководство пользователя, Страница: 127 / 252

Software • BIOS options
Ch
apte
r 4
Soft
w
are
127 Automation PC 820 User's Manual V 1.00
BIOS setting Meaning Setting options Effect
COM A Settings for the COM1 serial interface in
the system.
Disabled Disables the interface.
Enabled Enables the interface.
Base I/O address Selection of the base I/O address for the
COM port. 238, 2E8, 2F8, 328, 338,
3E8, 3F8
Selected base I/O address is assigned.
Interrupt Selection of the interrupt for the COM port. IRQ 3, IRQ 4, IRQ 5,
IRQ 6, IRQ 7, IRQ 10,
IRQ 11, IRQ 12
Selected interrupt is assigned.
COM B Settings for the COM2 serial interface in
the system.
Disabled Disables the interface.
Enabled Enables the interface.
Base I/O address Selection of the base I/O address for the
COM port. 238, 2E8, 2F8, 328, 338,
3E8, 3F8
Selected base I/O address is assigned.
Interrupt Selection of the interrupt for the COM 2
port. IRQ 3, IRQ 4, IRQ 5,
IRQ 6, IRQ 7, IRQ 10,
IRQ 11, IRQ 12
Selected interrupt is assigned.
COM C Setting of the COM port for the touch
screen on the monitor/panel connector.
Disabled Disables the interface.
Enabled Enables the interface.
Base I/O address Selection of the base I/O address for the
COM port. 238, 2E8, 2F8, 328, 338,
3E8, 3F8
Selected base I/O address is assigned.
Interrupt Selection of the interrupt for the COM port. IRQ 3, IRQ 4, IRQ 5,
IRQ 6, IRQ 7, IRQ 10,
IRQ 11, IRQ 12
Selected interrupt is assigned.
Hardware security
key Settings for the hardware security key
(Dongle) are made here. Disabled Disables the interface.
Enabled Enables the interface.
Base I/O address Selection of the base I/O address for the
hardware security interface. 278, 378, 3BC Selection of the base I/O address for the parallel
port.
ETH2 LAN controller For turning the onboard LAN controller
(ETH2) on and off. Disabled Disables the controller.
Enabled Enables the controller.
ETH2 MAC Address Displays the Ethernet 2 controller MAC
address. None -
Table 83: 945GME Legacy Devices setting options