35
Programming Manual-
Using the Programming Keys
IT
EN
DE
FR
ES
PT
Setting values
In all the screens in which you must enter alphanumeric characters,
the window opens displaying the current value with the cursor po-
sitioned on the last character.
By pressing the key you can delete the entered values while po-
sitioning with the cursor again on the last character.
You can exit these screens by confirming with .
Press
to confirm. Press
ESC
to exit or wait for the time-out (10
seconds).
Using the keys you can increase, decrease or select the values
requested in the screen.
Press
to confirm. Press
ESC
to exit or wait for the time-out (10
seconds).
The last selection made is marked with the “tick” symbol (
✓
) to the
left of one of the possible choices.
Once the selection has been made, the setting made is marked with
the “tick” symbol (
✓
) on the top right-hand corner of the screen.
Confirmation for execution of a function
You can exit these screens by confirm/contine with or you can
exit without saving by pressing
ESC
.
PROGRAMMING WITH THE PCS/XIP
If the entry panel has been programmed using the PCS/XIP software, for safety reasons, only
some parameters are modifiable.
In all the other cases, the symbol shown to the side will appear on the display.
4567_
Call Code
ESC
(2-15)
5
Keypad
ESC
(2-15)
5
Keypad
ESC
to confirm
Press
Reset
ESC
to confirm
Press
Delete
ESC
DIGITHA_
Name
ESC
ESC
✓
By Command
✓
Always on
By touch
Backlight On
ESC
YYYY/MM/DD
YYYY/DD/MM
MM/DD/YYYY
Date format
ESC
✓
DD/MM/YYYY
✓
