bpr Rotax 912 i Series, Руководство по обслуживанию, Страница: 419 / 458

Effectivity: 912 i Series
Edition 1/Rev. 0
d
053
57.
fm
MAINTENANCE MANUAL
BRP-Powertrain
78-10-00
Page 5
July 01/2012
SYSTEM DESCRIPTION
The exhaust collects the gases produced in the
combustion chamber, leads them via the
exhaust manifold to the muffler, which is used to
reduce noise. The exhaust gas passes via the
outflow pipe through a tail pipe into the open.
MAINTENANCE
As well as the maintenance and special checks,
see the relevant Maintenance Manual Line for
the respective 912 i Series engine type.
REMOVAL
EXHAUST ASSY. - REMOVAL
Preparation
See also section 76-50-00 Wiring harness.
- Unplug the temperature sensor (EGT).
Fig. 1
EXHAUST PIPE - REMOVAL
Fig. 2
m
WARNUNG
m
WARNING
Danger of severe burns and scalds! Allow the
engine and exhaust to cool to ambient tempera-
ture before starting work.
m
WARNUNG
NOTICE
Follow the aircraft manufacturer's instructions
for removal.
1. Exhaust flange 2. Temperature sensor (EGT)
3. Exhaust pipe
Step Procedure
1 Loosen 2 M8 hex. nuts.
NOTE: This is a lock nut!
1. M8 hex. nut 2. Cylinder head
3. Exhaust pipe 4. Exhaust flange