Byers Products Group
Model 60
ASSEMBLY &
INSTALLATION
INSTALLATION GUIDE
Copyright
©
2006-2014 BPG
Stairwell Safety Railing
TM
U.S. Patent No.
8,702,069
Страница 1: ...Byers Products Group Model 60 ASSEMBLY INSTALLATION INSTALLATION GUIDE Copyright 2006 2014 BPG Stairwell Safety Railing TM U S Patent No 8 702 069 ...
Страница 2: ...npack your Versa Rail shipping carton and locate all of the components pictured below and verify that you have the correct quantity of each part If all parts are found proceed to assembly If any parts are not found contact BPG for replacement see page 4 ...
Страница 3: ...tic You will need wrenches to tighten bolts a pencil to mark hole locations and a drill with a 5 32 drill bit for making pilot holes for the lag screws 1 Assemble the top rails into the long joiner Adjust the hole positions to best fit your ladder opening width Fig 1 Install bolts washers and nuts as shown but do not tighten 2 Assemble the rear legs onto the top rails Fig 2 Install bolts washers a...
Страница 4: ...ompleted Your attic will now be a safer place to visit 5 Place the rail assembly over the ladder opening Align the brackets as shown and mark the hole locations for the floor brackets Fig 5 then drill 5 32 pilot holes at each location x 2 deep Note Do not drill pilot holes for the stabilizer brackets 6 Install the lag screws through the floor bracket and into the pilot holes Fig 6 Tighten firmly b...
