1. When you open the product packaging, please check the product and accessories at first.
If there are any discrepancies, please contact us promptly. We will provide you with a
satisfactory solution.
2. The hot and cold water supply pipe of the valve must be properly connected. When facing the
front of the valve, the hot water supply is on the left and cold water supply is on the right.
Incorrect connection will cause permanent damage to the cartridge.
3. If the accessories to be changed without affecting the use, we will not make a prior notice.
4. The impurities in the water supply pipe must be cleared before installation to avoid blockage.
5. The water pressure of the faucet is 0.05MPa-1.0MPa(including cold water and hot water
Pressure). Applicable water temperature range:39°F-194°F.
CARE INSTRUCTIONS
DO
NOT:
A
A-1
A-2
A-3
A-4
A-5
B
C
D
E
No.
Description
Pressure balanced diverter valve
Valve
Face plate with sealjoint
Diverter knob kit
Trim cap
Allen screw
Hand shower
Head shower
Flexible hose
Shower arm and flange kit
Firmly hand tighten the hose
to the valve and add a quarter
turn using the proper wrench
Tighten more if needed
CONNECTION ADVICE
Plumber's
putty
Thread seal
tape
Included
2
、
PREPARATION BEFORE INSTALLATION
1
、
INSTALLATION PRECAUTIONS
3
CONCEALED FAUCET ACCESSORIES LIST
、
4
、
TECHNICAL DRAWING OF DRILING SIZE
SHOWER SYSTEM FAUCET
Installation instruction
A3794
CH/BN/MB/BG/ORB
Website:www.boyellivng.com
Customer Service
：
: 323-982-8955
Email: [email protected]
*
Apply plumber's
putty under the plastic
cover deck plcta to seal
your installation.
*The model shown in
the installation steps
may differ from the one
in box however
connection type and
installation steps are
the same.
1. The size of the embedded box that needs to be drilled is 6"*6".
2
、
The depth of the embedded box is 1.8"-2.4".It's better to drill the depth of 1.8"for
blank wall.
E1
E
2
E4
E
5
E
D
C
A
E3
B
SHOWER
Hot
water
Cold
water
