38
Appendix
ActionScript Reference
Action/Network Commands
The following are some of the more frequently used commands within Actions or sent over the network . For the complete guide
to all such commands, refer to the Calypso Action Control Language (CACL) manual found in the Guides & Resources section of
the FrontRow web site, https://www .gofrontrow .com/support .
CM900 Volume Commands
Syntax:
#AUDn[Mute,Volume];
Name
Required/Optional
Data Type
Format
Description
n
Required
Constant
1
Denotes the sub-device. Since the
CM900 has only one sub device, this
is always 1
Mute
Optional
Variant
M
Command
where Command is 0, 1,
or +
Audio mute:
• off (0);
• on (1); or
• toggle (+)
Volume
Optional
Variant
V
Command
where Command is an
integer from 1 to 100,
+, or -. The + or - may
be followed by a single
digit (1-9) indicating the
change in volume steps
to be made. If no digit is
entered, the volume will
increment by one.
Sets the audio volume to:
• the percentage of maximum
volume corresponding to the
integer used;
• an increase in volume (+) by n
steps (+n); or
• a decrease in volume (-) by n
steps (-n)
Examples:
Unmute and increase volume: #AUD1[M0,V+];
Unmute and decrease volume by 2 steps: #AUD1[M0,V-2];
Set volume to 10% of maximum: #AUD1[V10];
Mute: #AUD1[M1];
Unmute: #AUD1[M0];
Toggle mute: #AUD1[M+];
Query current settings (returns value of input, mute, and volume): #AUD1[];