Cambridge X33N | WX36N
QuickStart Guide
Brfore using, read the “ Quick Start Guide ” and the owner’s manual to ensure
correct usage through understanding.
After reading, store them in a safe place for future reference.
Do not look into the lens while the projector’s power is turned on.
Do not put something close the lens when power on the projector, it may damage
the projector or may cause fire hazard.
WARNING
Accessories
Positioning the projector
Remote control with batteries Quick start guide
User's Manual (CD)
AC Power cord
HDMI cable
VGA
VIDEO
HDMI
MENU
INPUT
FREEZE
MUTE
BLANK
LAMP
PATTERN
KEYSTONE
TIMER
INFO.
SCREEN
IMAGE
AUTO
+
+
-
-
D.ZOOM VOLUME
The brightness in a room has a great influence on picture quality. It is recommended to limit the ambient lighting in
order to get the best image.
All measurements are approximate and may vary from the actual sizes.
Please make sure that following items
are in luded in the box, along with the
main. If any items missing, contact
your deale .
WiFi Dongle(Optional)
Welcome
Welcome
Projector
XGA
WXGA
30”
(Diagonal:Inch)
Max.
Min.
(Center)
0.888m(0.969m)
3.017m(3.288m)
4.537m(4.945m)
6.058m(6.602m)
9.099m(9.915m)
10.937m(11.918m)
30”
(Diagonal:Inch)
Max.
Min.
(Center)
0.942m(0.969m)
3.199m(3.288m)
4.811m(4.945m)
6.432m(6.602m)
9.647m(9.915m)
11.595m(11.918m)
16:9
4:3
Screen size
(WxH)mm
4:3 aspect ratio
30"
100"
150"
200"
300"
610x457 2032x1524 3048x2286 4064x3048 6096x4572
Maximum
0.9m
3.0m
4.5m
6.1m
9.1m
Minimum
Maximum
Minimum
Maximum
Minimum
1.1m
3.6m
5.5m
7.3m
10.9m
Screen size
(WxH)mm
16:9 aspect ratio
30"
100"
150"
200"
300"
664x374 2214x1245 3321x1868 4428x2491 6641x3736
1.0m
3.3m
5.0m
6.6m
9.9m
1.2m
4.0m
6.0m
7.9m
11.9m
16:9
16:10
Screen size
(WxH)mm
16:9 aspect ratio
30"
100"
150"
200"
300"
664x374 2214x1245 3321x1868 4428x2491 6641x3736
1.0m
3.3m
5.0m
6.6m
9.9m
1.2m
4.0m
6.0m
7.9m
11.9m
Screen size
(WxH)mm
16:10 aspect ratio
30"
100"
150"
200"
300"
646x404 2154x1346 3231x2019 4308x2692 6462x4039
0.9m
3.2m
4.8m
6.4m
9.6m
1.1m
3.8m
5.8m
7.7m
11.6m
Maximum
Minimum
Turn on the projector
Install remote control batteries
Operating range
1.Complete peripheral connections (with a computer, VCR,etc.) before
turning on theprojector.
2.Connect the projector’s AC power cord into the AC outlet. The POWER
indicator turns red.
3.Press the POWER button on the top control or on the remote control. The
POWER indicator becomes green and the cooling fans start to work. The
preparation display appears on the screen.
4.If the projector is locked with a PIN code, a PIN code input dialog box
appears. Enter the PIN code as instructed below.
移动
Enter a PIN code
Press the OK button, press
button to select a number and press the OK button to enter it to the PIN code
box, then number changes to "*", automatically move the cursor to next box.
If you fixed an incorrect number, press MENU button to reset it again.
Repeat the steps to complete entering a threedigit number. After entering the three-digit number, automatically
move the cursor to "Set", press the OK button then you can start to operate the projector.
If you entered an incorrect "PIN code", the number (***) turn red. PIN code will be reset within one
second automatically, Enter the correct PIN code all over again.
①
Open the battery cover.
②
Install new batteries.
③
Put the cover back.
Two AAA batteries
For correct polarity
(+ and –), be sure
battery terminals
are in contact
with pins in the
compartment.
To ensure safe operation, please observe the following precautions:
● Use two (2) AAA or LR3 type alkaline batteries.
● Always replace batteries in sets.
● Do not use a new battery with a used battery.
● Avoid contact with water or liquid matter.
● Do not expose the remote control to moisture or heat.
● Do not drop the remote control.
● If the battery has leaked in the remote control, carefully wipe the case clean
and install new batteries.
● Risk of explosion if two batteries are replaced by an incorrect type.
● Dispose of used batteries according to the instructions on the battery or local
regulations or guides.
Point the remote control toward the remote control receivers
on the projector (front and back) when pressing any button.
The maximum operating range for the remote control is
about 5 meters and 60 degrees.
Adjustable foot
30°
30°
5m
30°
30°
5m
The projector can be adjusted up to 40 mm (10 degree) with the
adjustable foot. Rotate the adjustable foot to lift the projector to
a certain height. During lifting, rotate the footclockwise.
To lower or retract the adjustable foot, rotate the foot counterclockwise.
Keystone distortion of projected images can be corrected by auto
settings, remote control operation or menu operation.
Adjustable foot
Move the cursor to "Set", and press "OK".
OK
Esc
Move Select Back
PIN Code
Set
Cancel
*
