37
Paste sidewall foam
Paste the Side L foam panel inside box3d. Start by removing a small part of the protective paper. Paste
the adhesive foam part at the lower right side of the Right panel. Continue to the back panel by carefully
removing the protective paper from the adhesive foam. Firmly press the foam into the corners. Align the
air intake and continue to the Left panel.
Note: for box3d XL, this takes two or three panels instead of one.
Use the same method to paste the Side S foam panel above the Side L foam panel.
Insert a piece of the leftover foam (5cm x 6cm) in the fan outlet. This is not necessary, but it reduces the
sound of the fan.
Note: make sure the outlet is not blocked.
