1
SelectTech
®
BD1090 International Dumbbell Unpacking Instructions
8000771.051517.C
Nautilus, Inc., www.nautilusinternational.com | Printed in China | © 2012 Nautilus, Inc.
®
®
The following procedure will make it easier to remove
your SelectTech
®
dumbbell from its packaging.
The dumbbell is heavy. Ask for assistance if necessary.
• Open the top flaps of the shipping box and remove the
upper section of foam.
Remove the plastic wrapper.
• Remove the reusable Restraint Strap. See 1.
•
Set selection numbers on the adjustment knobs to 41 on
both ends of dumbbell (
see 2
), and remove the dumbbell
(see 3). If necessary, set the knobs to a lower weight and
remove the dumbbell and weight plates separately.
•
Remove the base from the package, and place on floor or
dumbbell stand
. See 4.
•
Place dumbbell in the base
.
When moving the dumbbell assembly, use the handles that are
molded into each end of the base.
Note:
If the dumbbell assembly is to be used for retail display,
secure the dumbbell with the reusable strap after
assembly.
In a retail display setting, the restraint strap allows enough
movement for demonstration, but prevents damage to the unit
and helps to avoid dropping and/or misuse by consumers.
3mm
X2
1
2
3
4
If you have questions, please contact your local distributor. To find your local distributor, go to: www.bowflexinternational.com
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all Warnings on this machine.
Restraint strap
