www.boutiquecamping.com
|
+44 (0) 203 394 2986
|
Peg out the 3 guy ropes already attached to secure the
doorway.
Assemble the A-frame and place inside door. Unscrew
the plastic rain cap, put the spike through the hole at the
top of the door and fit the feet into their holding pockets.
Once outside, screw the plastic rain cap back on.
7.
Locate the thin aluminium flexible pole and thread
through the sleeve of the doorway.
Once through, insert the metal pin on either side of the
pole to hold the tension. This creates the shape of your
canopy doorway.
8.
Please note there is a webbing strap that goes from each
end of the doorway - this is to hold the shape while you
peg the tent out. Once this is done please unclip this as
this will be a trip hazard if left in place.
9.
10.
12.
11.