Sheet Code:
BP-IM-071_REV0
Release Date: 24/05/2021
Copyright 2016 Spotspot Ltd. (T/A
Bouncepad) all rights reserved.
Confidential, no part of this publication
may be reproduced or transmitted in any
form without the written permission of the
copyright holder.
Wing - Slim
Assembly Instructions
In the Box
Fixings
List
Tools Required:
All tools provided
Mounting Arm
Access Panel
Mounting
Bracket
Mounting Arm
Case Back
Faceplate
2x M4x10mm
Buttonhead
screw
10x M6x10mm
Buttonhead
screw
*fixings to attach the stand to the
ground are not provided.
Position the Mount Bracket on the
ground where the stand is to be
located.
1
If using a hard-wired power supply,
feed the cable into the Mounting
Arm.
5
6
Locate the Mounting Arm onto the
Mount Bracket as shown.
Minimum:
or
380mm
15”
2
Mark your mounting surface, then
drill (as appropriate to your chosen
fixing method).
*fixings to attach the
product to the ground
are not provided.
3
4
Secure the Mount Bracket to your
mounting surface, with your chosen
fixing method.
Remove the Access Panel from the
Mounting Arm. Store all parts safely
aside for use later.
*shown for illustrative purposes.
